|
Elvis FANS!! |
|
1300 SERIES
|
|
THE FLEX-A-LITE 1300 SERIES FLEX FANS BUILD HORSEPOWER BY
FLATTENING OUT AT HIGH RPM TO REDUCE DRAG. THEY SAVE YOUR WATER
PUMP BY BEING LIGHTWEIGHT TO KEEP YOUR PUMP BEARING FROM WEARING
OUT. |
|
FLX-1317
|
17"
|
31.00
|
|
FLX-1318
|
18"
|
32.00
|
|
FLX-1319
|
19"
|
35.00
|
|
|
|
OEM FLEX FAN
|
|
OUR HEAVY DUTY REPLACEMENT COOLING FANS WORK BETTER THAT YOUR
OEM FLY SWATTER. FLEXIBLE STAINLESS STEEL BLADES WITH FRONT AND
REAR STIFFENERS MOVE MORE AIR AT ALL RPMS. THE BLADES ARE RIVETED
TO A HEAVY DUTY STEEL HUB AND ARE DESIGNED TO HANDLE THE MOST
DIFFICULT COOLING PROBLEMS |
|
G4917
|
17"
|
30.00
|
|
G4918
|
18"
|
32.00
|
|
|
|
ELECTRIC FANS |
|
THESE FANS ARE REVERSIBLE FOR MOUNTING IN FRONT OR BACK OF
THE RADIATOR AND HAVE MULTIPLE MOUNTING LOCATIONS TO FIT ALMOST
ANY APPLICATION. HIGH STRENGTH GLASS-REINFORCED POLYPROPYLENE
BLADE AND SHROUD AND PLASTIC CONSTRUCTION MINIMIZE WEIGHT. ULTRA-THIN
10 BLADE DESIGN FITS MOST CRAMPED LOCATIONS. INSTALLATION IS
EASY WITH STEP BY STEP ILLUSTRATED INSTRUCTIONS. COMPETE WIRING
KIT (PART #19001) WITH 170 DEGREE AUTOMATIC THERMAL SENSOR SOLD
SEPARATELY. |
|
G4903
|
14" DIAMETER 3-1/4" DEEP 1200-1250 CFM
|
79.00
|
|
G4904
|
16" DIAMETER 4-1/5" DEEP 1500-1600 CFM
|
82.00
|
|
|
|
FAN CLUTCHES |
|
WHEN YOUR OLD FAN CLUTCH GETS TIRED AND STARTS LEAKING, GET
A FLEX-A-LITE REPLACEMENT FAN CLUTCH. IT HAS A PATENTED SILICONE
FLUID RESERVOIR AND A FACTORY SEAL TO PROTECT AGAINST LEAKAGE. |
|
5200 SERIES NON THERMAL
|
|
OPERATES AT A LOW SPEED, DISENGAGES AT FREEWAY SPEEDS. |
|
FLX-5200
|
NON THERMAL CLUTCH
|
32.99
|
|
|
|
5500 SERIES THERMAL
|
|
OPERATES WHEN ENGINE TEMP REQUIRED |
|
FLX 5500
|
|
44.99
|
|
FLX-5655
|
SAME AS 5500 SERIES FOR RV'S/TOW VEH
|
79.99
|
|
|
|
HIGH PERFORMANCE ELECTRIC FANS |
|
WHEN YOU NEED SERIOUS AIRFLOW FROM AN ELECTRIC COOLING FAN,
LOOK NO FURTHER, PERMA COOL HAS THE ULTIMATE FANS. THESE UNITS
FEATURE PRECISION, PANCAKE STYLE, ELECTRIC MOTORS THAT ACTUALLY
TURN MORE RPM WITH LESS AMPERAGE DRAW THAN THEIR COMPETITORS.
FRONT AND REAR BALL BEARINGS IN EACH MOTOR INSURE LONG LIFE AND
NOISE-FREE OPERATION. UNITS LISTED BELOW USE ANODIZED ALUMINUM
BLADE FANS (ALL ARE REVERSIBLE FOR USE AS PUSHER OR PULLER) AND
THEIR OPEN STEEL HOUSINGS ALLOW PURE, UNRESTRICTED AIR FLOW FOR
MAXIMUM COOLING POWER.. |
|
|
|
THE FOLLOWING ARE 3-3/4" THICK, TURN @ 1800RPM, DRAW
9.5 AMPS, AND MOVE 2100-2200 CFM OF AIR.
|
|
19114
|
14"
|
79.00
|
|
19116
|
16"
|
88.00
|
|
THE FOLLOWING ARE 3-3/4" THICK, TURN @ 1700 RPM, DRAWS
10 AMPS, AND MOVES 1800 - 2000 CFM OF AIR..
|
|
19117
|
18"
|
104.00
|
|
|
|
FAN WIRING KIT |
|
INCLUDES 170 DEGREE AUTOMATIC THERMAL SENSOR, 16 GAUGE INSULATED
WIRE (12 FT), WIRE CONNECTORS, FUSE BLOCK POWER TAPS, IN-LINE
FUSE HOLDER WITH 30 AMP FUSE, WIRING DIAGRAMS FOR SINGLE AND
DUAL FAN INSTALLATIONS AND EASY STEP-BY-STEP INSTRUCTIONS. |
|
19001
|
|
$17.00
|
|
|
|
NYLON TIE REMOUNT KIT |
|
SO YOU HAD TO RIP OUT YOUR OIL COOLER, TRANSMISSION COOLER
OR ELECTRIC FAN AND NOW YOU CAN'T PUT IT BACK BECAUSE THE MOUNTING
TIES ARE ALL HACKED UP. DON'T PANIC... JUST GET THIS REMOUNT
KIT AND YOU'LL HAVE THE COOLER OR FAN REINSTALLED IN NO TIME.
THE KIT INCLUDES FOUR NYLON TIES, FOUR BUTTONS AND FOUR FOAM
PADS. |
|
G4990
|
NYLON REMOUNT KIT
|
8.95
|