OIL STUFF
	Oil stuff - Oil stuff - Oil stuff - Oil stuff - olive oil..
	OIL PANS AND PICKUPS
	30770	STOCK REPLACEMENT	155.99
	18670	STOCK REPLACEMENT PICK UP	12.00
	30355	6 QUART - 8" DEEP SUMP	224.99
	18425	EXTENDED PICK UP FOR USE #30355	39.00
	31660	6 QUART - 7-3/4" DEEP SUMP	249.99
	18525	EXTENDED PICK UP FOR USE #31660	49.00
	9337	CHROME STOCK FOR 301-455	159.00
	20500	7 QUART - 8-1/2" DEEP SUMP 301-455	215.00
	24480	P/U FOR USE W/20500 W/ STOCK OIL PUMP	40.00
	20490	8 QUART 9-3/4" DEEP SUMP 301-455	215.00
	24480	P/U FOR USE W/20490 WITH 3/4" INLET	40.00
	OIL PUMP DRIVE SHAFT
	RRE-HOPD	HARDENED OIL PUMP DRIVE SHAFT	20.00
	OIL PUMP
		There's only one. R.A. 4 sixty lb. w/pick-up	$45.00
	OIL ACCUMULATOR
	CHEAP INSURANCE FOR ENGINE WITH EXCESSIVE ROD AND MAIN CLEARANCES. PRE-LUBE FEATURE MOST DESIRABLE. OIL ACCUMULATOR KITS INCLUDES CANTON ACCUMULATOR WITH ELECTRIC SWITCH, MOUNTING CLAMPS, OIL SANDWICH ADAPTER, OIL FILTER WITH REPLACEABLE CARTRIDGE. add individual parts to complete an entire kit.
	24-024	2 QUART HEAVY DUTY W/ELECTRIC VALVE (2402E)	260.00
	24-0	3 QUART HEAVY DUTY W/ELECTRIC VALVE	358.00
	OIL ACCUMULATOR KIT REPLACEMENT PARTS
	22-940	OIL INPUT SANDWICH ADAPTER 3/8 NPT FITS 13/16-16 THREAD	46.99
	24-200	ACCUSUMP MOUNTING CLAMPS (1 PAIR) (2420)	16.99
	25-430	REUSEABLE OIL FILTER W/12/16"-16 THREAD 2 5/8 O-RING	98.99
	24-270	ELECTRIC SWITCH	104.99
	OIL PRESSURE SWITCH
	OUR IGNITION/FUEL PUMP SHUTOFF SWITCH SHUTS DOWN YOUR ENGINE WHEN YOUR OIL PRESSURE DROPS BELOW 7 PSI, SAVING YOUR ENGINE FROM DAMAGE. WITH COMPLETE INSTRUCTIONS AND WIRE DIAGRAM.
	G1438		11.95
	OIL SANDWICH ADAPTERS
	THESE ADAPTERS ALLOW THE HOOK-UP OF AN ENGINE OIL COOLER WHILE RETAINING THE USE OF THE STOCK OIL FILTER AT THE SAME LOCATION ON THE BLOCK. THEY ARE 1" THICK INLETS AND 3/8" NPT OUTLETS.
	1320	13/16-16 THREADS. 2-1/2" ID & 2-3/4" OD. O-RING	44.00
	SPIN-ON OIL FILTER BYPASS ADAPTERS
	SPIN-ON OIL FILTER BYPASS ADAPTERS INSTALL BY SIMPLY SPINNING ON IN PLACE OF THE STOCK OIL FILTER. INLET AND OUTLET ARE THREADED 1/2" NPT
	1020	13/16-16 THREADS, 2-1/2" ID & 2-3/4" OD O-RING	9.99
	90 DEGREE OIL FILTER BYPASS ADAPTERS
	NEW 90 DEGREE INLET AND OUTLET OIL BYPASS ADAPTERS ALLOW FOR REALLY TIGHT CONDITIONS AT THE BLOCK WHEN ADDING A REMOTE OIL FILTER SYSTEM OR ENGINE OIL COOLER. THEY EXTEND ONLY 1-3/8" FROM THE BLOCK MOUNTING SURFACE. INLET AND OUTLET ARE THREADED 1/2" NPT.
	1420	13/16-16 THREADS, 2-1/2" ID & 2-3/4" OD O-RING	24.00
	BOLT-ON OIL FILTER BYPASS ADAPTERS
	DESIGNED PRIMARILY FOR EARLY MODEL ENGINE BLOCKS WHICH DID NOT COME WITH A SPIN-ON TYPE OIL FILTER. THEY REPLACE THE STOCK OIL FILTER BRACKETS AND BOLT DIRECTLY TO THE BLOCK. THEY ARE NOT AVAILABLE FOR ALL APPLICATIONS.
	1011	MOST PONTIACS	16.99
	END MESSY OIL FILTER CHANGES:
	LOCATE YOUR FILTER WHERE YOU WANT IT
	OIL FILTER RELOCATION KITS
	EACH OIL FILTER RELOCATION KIT INCLUDES AN OIL FILTER BY PASS ADAPTER, A REMOTE OIL FILTER BRACKET WITH 1/2" NPT THREADS ON INLETS AND OUTLETS, TWO FULLY ASSEMBLED 30" NEOPRENE HOSES WITH FITTINGS, MOUNTING HARDWARE AND DETAILED INSTRUCTIONS. ALL RELOCATION KIT REMOTE FILTER BRACKETS ACCEPT 3/4-16 SPIN-ON FILTERS SUCH AS FRAM PH8A OR HP-1.
	1120	13/16-16 THREADS, 2-1/2" ID & 2-3/4" OD O-RING	64.00
	MAGNETIC DRAIN PLUG
	9062	TRAPS METAL PARTICLES FOUND IN OIL. 1/2"-20	3.50
	ENGINE DIPSTICK PIECES - STOCK REPLACEMENT
	9795830	W/O AC OUTSIDE DIPSTICK BLOCK TUBE	15.00
	546281	INNER TUBE FOR USE WITH WINDAGE TRAY	15.00
	490678	INNER TUBE Without WINDAGE TRAY	20.00
	9793342	DIPSTICK FOR NON AC	15.00
	9793341	DIPSTICK WITH AC	15.00
	480843	OUTSIDE BLOCK TUBE extension for AC	15.00
	9405	CHROME DIPSTICK-65-79 PONTIAC	18.95
	ENGINE OIL COOLER
	COOLER OIL FOR PERFORMANCE. CUT BACK OIL CHANGES AND RUN A COOLER ENGINE WITH AN ENGINE OIL COOLER. IT RUNS OIL THROUGH A SERIES OF COPPER TUBES THAT COLLECT HEAT, PASS IT TO A SURROUNDING ALUMINUM COLLAR AND THEN INTO THE AIR. IT'S EASY TO HOOK UP AND COULD BE THE CURE FOR OVERHEATING PROBLEMS.
	DER-15502		69.00