ROCKER ARMS
	HARLAND SHARP
	HARLAND SHARP ROLLER ROCKERS HAVE BEEN PRODUCING FRICTION-FREE HORSEPOWER-AN AVERAGE OF 15-40 OF THEM-SINCE 1960. THEY HAVE FEATURES SUCH AS A NEEDLE BEARING, FULL ROLLER FULCRUM ASSEMBLY AND A ROLLER TIP TO REDUCE FRICTION, WEAR AND STABILIZE VALVE TIMING.
	PART#	INFO	PRICE
	HS	1.5 FULL ROLLER	220.00
	HS	1.65 FULL ROLLER***	220.00
	***ALL HEADS REQUIRE THE INTAKE PUSHROD HOLES TO BE CLEARANCED FOR 1.65 ROCKER ARMS. EXHAUST PUSHROD HOLES REQUIRED FLASH CLEAN UP. EDELBROCK ALUMINUM HEADS REQUIRE PUSHROD HOLES TO BE CLEARANCED ON BOTH THE INTAKE AND EXHAUST.***
	COMPETITION CAMS MAGNUM ROLLER TIP
	THESE ROCKER ARMS OFFER YOU THE PERFORMANCE ADVANTAGES OF GREATER DURABILITY AND HIGHER EFFECTIVE RATIOS, PLUS FEATURE A ROLLER TIP TO REDUCE VALVE AND GUIDE WEAR. THE STIFFER DESIGN INHIBITS FLEX THAT CAUSES VARIATION IN RATIOS. HIGHER EFFECTIVE RATIOS ALLOW MORE VALVE LIFT AND THAT TRANSLATES INTO A 15-30HP INCREASE FOR YOU. PLUS THEY'RE ACCURATE AS COMPARED TO STOCK ROCKERS.
	1451-16	1.52 ROLLER TIP	135.00
	1452-16	1.65 ROLLER TIP***	135.00
	***CAST IRON HEADS REQUIRE THE INTAKE PUSHROD HOLES TO BE CLEARANCED FOR 1.65 ROCKER ARMS. EXHAUST PUSHROD HOLES REQUIRED FLASH CLEAN UP. EDELBROCK ALUMINUM HEADS REQUIRE PUSHROD HOLES TO BE CLEARANCED ON BOTH THE INTAKE AND EXHAUST.***
	STUD GIRDLES
	CIH	CAST IRON HEAD APPLICATION	159.00
	EAH	ALUMINUM HEAD APPLICATION	169.00
	EAHM	MONSTER -FOR ALUMINUM HEADS ONLY	189.00
	T & D SHAFT SYSTEMS FOR EDELBROCK HEADS
	THE ULTIMATE IN RIGIDITY. OUR T&D SHAFT SYSTEM WILL SPOIL YOU. LASH ADJUSTMENTS STAY PERFECT ALMOST INDEFINITELY. THE OTHER BENEFIT OF USING THE T&D SHAFT SYSTEM IS USING OFFSET ROCKER ARMS TO RELOCATE THE PUSHROD AFTER WIDENING THE PORT. PRICES ARE BASED ON OFFSET OF ROCKER.
		UP TO .080 OFFSET	890.00
		UP TO .450 OFFSET	959.00
		UP TO .550 OFFSET	970.00