|
WATER PUMPS |
|
|
|
FLOW KOOLER
|
|
|
WE OFFER A HIGH PERFORMANCE WATER PUMP THAT HAS A HIGHER FLOW
RATE THAN STOCK. WISH THEY WERE CHEAPER, BUT THEY'RE NOT. |
|
|
1649
|
ALUMINUM, 11 BOLT, 4-1/2" WORKING HUB HT
|
95.00
|
|
|
1622
|
CAST IRON, 8 BOLT, 3-5/8" WORKING HUB HT
|
110.00
|
|
|
ADVANTAGES OF USING A FLOW KOOLER CAST IRON WATER PUMP VERSUS
ONE FROM YOUR LOCAL PARTS STORE ARE AS FOLLOWS:
1. THEY ARE NOT REBUILT
2. LIFE TIME WARRANTY
3. DOUBLE FLOW RATE AT IDLE TO SOLVE LOW SPEED OVERHEATING PROBLEMS.
4. AS YOUR RPM RISES, FLOW KOOLER WATER PUMP BEGINS TO FLOW LIKE
A REGULAR WATER PUMP. |
|
|
|
|
MEZIERE
|
|
|
|
|
|
THE NEW MEZIERE WATER PUMP IS SIMPLICITY IN FUNCTION AND DESIGN.
INTENDED FOR OFF ROAD USE, THIS PUMP BOLTS DIRECTLY TO A 1968
OR LATER TIMING COVER, REPLACING THE PLATE AND INNER SLEEVES.
WE'VE HAD ONE ON D-MAC'S 1964 GTO FOR A YEAR WITHOUT ANY FAILURE.
THESE WATER PUMPS ARE LIGHT WEIGHT. HAVE A FLOW RATING OF 32
GPM (STANDARD DUTY VERSION), ARE CNC MACHINED FROM 6061-T6 ALUMINUM,
AND HAVE A ONE PIECE MAIN BODY. INLET ADAPTERS FOR 1-1/4",
1-1/2", 1-3/4" AND #16 AN. FULLY REBUILDABLE. ELECTRIC
MOTOR DRAWS ONLY 6 AMPS. ALL STAINLESS STEEL HARDWARE INCLUDED.
ALSO AVAILABLE IN COLORS AS FOLLOWS: BLACK, POLISHED, PURPLE,
RED AND BLUE. PLEASE SPECIFY COLOR WHEN ORDERING. |
|
|
MSDWP
|
STD DRIVE (600-700 HRS SERV)
|
285.00
|
|
|
MHDWP
|
HEAVY DUTY DRIVE (UP TO 3000 HRS SERV)
|
305.00
|
|
|
|
WATER PUMP DIVIDER PLATES |
|
|
N140PF
|
64-68 2 PIECES
|
45.00
|
|
|
9796349
|
LATE MODEL WITH SEALS
|
25.00
|
|
|
9796347 |
INNER SLEEVES WITH RUBBER SEALS |
15.00 |
|
|
|
ELECTRIC WATER PUMP DRIVE KIT |
|
|
YOUR MECHANICAL WATER PUMP IS STEALING 15 - 20 HORSEPOWER
FROM YOU AT HIGH RPM. GET IT BACK WITH THIS MOROSO ELECTRIC WATER
PUMP DRIVE KIT. IT COMES WITH A 12 VOLT ELECTRIC MOTOR AND ALL
NECESSARY DRIVE PULLEYS, BELTS, FASTENERS AND SWITCHES. FOR DRAG
RACE USE ONLY. |
|
|
63750
|
DRIVE KIT
|
99.99
|
|
|
97210
|
REPLACEMENT 12 VOLT MOTOR
|
44.99
|
|
|
97220
|
REPLACEMENT WATER PUMP PULLEY
|
9.99
|
|
|
97250
|
REPLACEMENT ELECTRIC MOTOR PULLEY
|
9.99
|
|
|
97230
|
REPLACEMENT BELT
|
10.99
|
|
|
|
HOW TO "BURP" YOUR
COOLING SYSTEM |
|
|
KEEP THE AIR OUT OF YOUR COOLING SYSTEM AND YOUR MOTOR WILL
RUN COOLER LONGER. DEDENBEAR'S MANIFOLD EXPANSION TANK WILL MOUNT
ON ANY V8 TO CONSTANTLY BLEED OF TRAPPED AIR. MADE FROM CAST
ALUMINUM, IT ACCEPTS 1-1/2" OR 1-1/4" HOSES AND HAS
A 3/4" PIPE THREAD FOR USE ON THE FITTINGS. YOU CAN VISUALLY
CHECK COOLANT LEVELS THROUGH THE VISUAL SIGHT GAUGE AND THERE'S
EVEN A PROVISION FOR HOOKING UP YOUR CATCH CAN. STANDARD RADIATOR
CAP NOT INCLUDED. |
|
|
ET1K
|
AIR BLEED SYSTEM
|
136.00
|